Chipscope::csejtag_Target Flush - Xilinx ChipScope Pro User Manual

::chipscope::csejtag_target flush

This subcommand flushes the buffer associated with a previously opened and locked
JTAG target device.
Note:
subcommand before calling this subcommand.
Syntax
Arguments
Table 5-21: Arguments for Subcommand ::chipscope::csejtag_target flush
Returns
An exception is thrown if the subcommand fails.
Example
Attempt to flush an opened and locked buffer of a JTAG target to make data writes occur
immediately.
Back to list of all CseJtag Tcl Commands
ChipScope Pro Software and Cores User Guide
UG029 (v14.3) October 16, 2012
The JTAG target must be locked by using the ::chipscope::csejtag_target lock
::chipscope::csejtag_target flush handle
Argument Type
Required
handle
%::chipscope::csejtag_target flush $handle
www.xilinx.com
Description
Handle to the session that is returned by
::chipscope::csejtag_session create.
CseJtag Tcl Commands
149