Xilinx ChipScope Pro User Manual page 129

•
•
•
•
•
•
•
•
•
•
•
•
ChipScope Pro Analyzer Command Line Options
On Windows systems, the ChipScope Pro Analyzer tool can be started either from the
command line or from the Start menu.
•
•
•
•
Optional Arguments
The following command line options are available, if run from the command line:
-geometry <width>x<height>+<left edge x coord>+<top edge y coord>
-project <path and filename>
-init <path and filename>
ChipScope Pro Software and Cores User Guide
UG029 (v14.3) October 16, 2012
Open Cable/Search JTAG Chain: Automatically detects the cable, and queries the
JTAG chain to find its composition
Turn On/Off Auto Core Status Polling: Green icon means polling is on, red icon
means polling is off. Same as JTAG Chain > Auto Core Status Poll
Run: Same as Trigger Setup > Run (F5)
Stop: Same as Trigger Setup > Stop Acquisition (F9)
Trigger Immediate: Same as Trigger Setup > Trigger Immediate (Ctrl+F5)
Go To X Marker: Same as Waveform > Go To > Go To X Marker
Go To O Marker: Same as Waveform > Go To > Go To O Marker
Go To Previous Trigger: Same as Waveform > Go To > Trigger > Previous
Go To Next Trigger: Same as Waveform > Go To > Trigger > Next
Zoom In: Same as Waveform > Zoom > Zoom In
Zoom Out: Same as Waveform > Zoom > Zoom Out
Fit Window: Same as Waveform > Zoom > Zoom Fit
On 32-bit Windows systems, you can invoke the ChipScope Pro Analyzer tool from
the command line by running:
<XILINX_ISE_INSTALL>\bin\nt\analyzer.exe
On 64-bit Windows systems, you can invoke the ChipScope Pro Analyzer tool from
the command line by running:
<XILINX_ISE_INSTALL>\bin\nt64\analyzer.exe
On 32-bit Linux systems, you can invoke the ChipScope Pro Analyzer tool from the
command line by running:
<XILINX_ISE_INSTALL>/bin/lin/analyzer
On 64-bit Linux systems, you can invoke the ChipScope Pro Analyzer tool from the
command line by running:
<XILINX_ISE_INSTALL>/bin/lin64/analyzer
where <XILINX_ISE_INSTALL> represents the location where the Xilinx ISE Design
Suite tools are installed.
Set location, width and height of the ChipScope Pro Analyzer tool program window.
Reads in specified project file at start. Default is not to read a project file at start up.
www.xilinx.com
ChipScope Pro Analyzer Command Line Options
129