Chapter 11
[1]
Point to Note at Installation
When installing the laser scanner cover, be sure to put the 4 flat cables
[2] and the 3 harnesses [3] through the hole [1] of the laser scanner
cover in advance.
[3]
[1]
[3]
[2]
11.5.10 Upper Frame Unit
11.5.10.1 Before Removing the Upper Frame Unit
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-6)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-8)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]
11.5.10.2 Removing the Upper Frame Unit
1) Remove the harness guide [1].
- 4 screws [2]
11-18
[2]
F-11-42
[2]
2) Remove the screw [2] on the backside of the flat cable [1].
3) Remove the harness guide [1].
0019-5936
0019-5937
[2]
[1]
[1]
F-11-43
[1]
[2]
F-11-44