Frame Erase Width Unit Of Measurement - Canon IR2020 Copying Manual

Frame Erase Width Unit of Measurement

You can set the unit of measurement for the frame erase width.
NOTE
The default setting is 'mm'.
1
3
2
3
4
3-26
Specifying Copy Settings
[Additional Functions] ➞ open the <COPY
Press
SETTINGS> menu.
If necessary, see the screen shots in steps 1 and 2 in "Image Direction Priority,"
on p. 3-5.
Press [ ] or [
press [OK].
COPY SETTINGS
6.MM/INCH ENTRY
The <MM/INCH ENTRY> menu appears.
Press [ ] or [
[OK].
If you want to set the standard frame erase width in mm, select 'mm'.
If you want to set the standard frame erase width in inch, select 'INCHES'.
MM/INCH ENTRY
The selected mode is set, and the LCD display returns to the <COPY
SETTINGS> menu.
Press [Stop] to return to the Standby display.
] until <MM/INCH ENTRY> appears ➞
] to select 'mm' or 'INCHES' ➞ press
mm