Advertisement
Chapter 18
ADF Feeding Test
Execute feeding operation according to the scanning feeding speed (specified in SPEED, 2-SIDE, COUNT)
Sub item
COUNT
Not used
START
Start feeding
<BOOKFEED>
Testing Book Feed Operation
Sub item
PAGE
Display the number of pages that had been book-fed
START
Start book feeding
18.5.3 PRINT
18.5.3.1 PRINT List
<PRINT>
Printing PG pattern
Sub item
PG-TYPE
Enter PG number
COUNT
Enter the number to be output
PHASE
Select 1-sided/2-sided
MODE
Not used
THRU
Not used
DENS-M
Not used
DENS-C
Not used
DENS-Y
Not used
DENS-K
Not used
COLOR-M
Selection for each color is available
The selected color (ON) is to be output.
Setting value: 1: ON, 0: OFF
COLOR-Y
Selection for each color is available
The selected color (ON) is to be output.
Setting value: 1: ON, 0: OFF
COLOR-C
Selection for each color is available
The selected color (ON) is to be output.
Setting value: 1: ON, 0: OFF
COLOR-K
Selection for each color is available
The selected color (ON) is to be output.
Setting value: 1: ON, 0: OFF
SIZE
Display paper size
PAPER
Display presence/absence of paper
MATERIAL
Display paper type
FACE UP
Not used
DOWN
FEED
Selection for the pickup position
START
Start PG pattern print
Execute output that has been selected above by pressing it.
18.5.4 FAX
18.5.4.1 FAX List
<MODEM>
Sub item
RELAY-1
CML
P
S
H
D
R
18-36
TESTMODE > SCAN > ADFTEST
TESTMODE > SCAN > BOOKFEED
TESTMODE > PRINT
TESTMODE > FAX > MODEM
Test ON/OFF state of NCU's each relay and port SW
Description
T-18-65
Description
T-18-66
Description
T-18-67
Description
0020-2026
0020-2027
Advertisement
Chapters
Troubleshooting
