Laser Scanner Cover; Before Removing The Laser Scanner Cover; Removing The Laser Scanner Cover - Canon iR C1020 Series Service Manual

Chapter 11
[1] [4] [2]
[4]
[1]
[6]
2) Remove the controller box [1].
- 6 screws [2]
[2]

11.5.9 Laser Scanner Cover

11.5.9.1 Before Removing the Laser Scanner Cover

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]
5) Remove the Electrical Components Cover.(page 11-15)Reference [Re-
moving the Electrical Components Cover]
6) Remove the Controller Box.(page 11-15)Reference [Removing the
Controller Box]
7) Remove the Off Hook PCB. (only of the machine with FAX)(page 11-
24)Reference [Removing the Off Hook PCB]
8) Remove the DC Controller PCB.(page 11-22)Reference [Removing the
DC Controller PCB]

11.5.9.2 Removing the Laser Scanner Cover

1) Remove the harness guide [1].
- 1 cable clip [2]
- 1 cable holder [3]
- 1 flat cable [4]
- 4 screws [5]
11-16
[4] [2] [4]
[3] [4]
F-11-34
[1]
[2]
F-11-35
[5]
[4]
[5]
[1]
[1]
2) Remove the right frame reinforcement plate [1].
- 8 screws [2]
0020-3335
0020-3295
3) Open the 4 wire saddles [1] and free the 5 harnesses [3] from the 2 harness
guide mouths [2].
F-11-36
[1]
[2]
F-11-37
[4]
[3]
[5]
[2]
[2]