Main Unit; Removing The Upper Feed Guide Unit - Canon Inner Finisher-H1 Service Manual

Main Unit

Removing the Upper Feed
Guide Unit
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 41
2. Remove the Front Cover
Cover Unit" on page 55
3. Remove the Rear Cover."Removing the Rear Cover"
on page 55
■ Procedure
CAUTION:
Be sure not to lose the Gear [1] and the Pin [2] when
disassembling/assembling.
[1]
1. Remove the Cable Guide [1].
• 2 Connectors [2]
• 1 Screw [3]
• 1 Claw [4]
Unit."Removing the Front
[2]
4. Parts Replacement and Cleaning
2x
[4]
[1]
2. Remove the 1 Clip [1] and 1 Bushing [2].
[2]
[1]
3. Remove the Upper Feed Guide Unit [1].
• 2 Screws [2]
2x
[2]
59
1x
[4]
[3]
[2]
[1]