3.2 Processor
This product ships with the CPU installed and a thermal solution installed. Because the thermal
solution is custom and the thermal interface is critical for passive cooling, Kontron does not
guarantee thermal performance if the heat sink is removed and then reinstalled by the end user.
3.3 Memory
Only use validated memory with this product. Currently recommended configuration and part
numbers are:
Manufacturer Part Number
M393T6450FG0-CCC
MT18HTF12872Y-40EA1
MT18HTF12872Y-40EA2
M393T2950BG0-CCC
M393T2950BZ0-CCC
M393T5750BS0-CCC
M393T5750BS0-D5C
M393T5750BY0-CCC
MT18HTF25672Y-40EA1
Memory should have the following characteristics:
•
DDR2 400
•
1.8V only
•
Single-sided or double-sided
•
1 layer of BGA on PCB side
•
X4 or X8 configuration supported
•
Serial Presence Detect (SPD) EEPROM
•
72-bit DIMMs only
•
1.45 inch maximum height
Because static electricity can cause damage to electronic devices, take the
following precautions:
•
•
•
Description
DIMM DDR2-400 512MB 64M*72 REG ECC
DIMM DDR2-400 1GB 128M*72 REG ECC 1
DIMM DDR2-400 1GB 128M*72 REG ECC 1
DIMM DDR2-400 1GB 128M*72 REG ECC 1
DIMM DDR2-400 1GB 128M*72 REG ECC 1
DIMM DDR2-400 2GB 256M*72 REG ECC 1
DIMM DDR2-400 2GB 256M*72 REG ECC 1
DIMM DDR2-400 2GB 256M*72 REG ECC 1
DIMM DDR2-400 2GB 256M*72 REG ECC 1
Keep the board in its anti-static package, until you are ready to install
memory.
Wear a grounding wrist strap before removing the board from its package;
this will discharge any static electricity that may have built up in your body.
Handle the board by the faceplate or its edges.
WARNING
3-3
Company
Samsung Semiconductor
Micron Technology, Inc.
Micron Technology, Inc.
Samsung Semiconductor
Samsung Semiconductor
Samsung Semiconductor
Samsung Semiconductor
Samsung Semiconductor
Micron Technology, Inc.
AT8001 User's Guide