Table of Contents
Advertisement
5.1.2
Menu Bar
The Menu Bar at the top of the window lists these selections:
Menu Selection
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Use the left and right
5.1.2.1
Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The
chart on the following page describes the legend keys and their alternates.
Key
<F1>
<Esc>
arrow keys
<Home> or <End>
<PgUp> or <PgDn>
<->
<+>
<F2> and <F3>
<F7>
<F8>
<F9>
<F10>
<Enter>
To select an item, use the arrow keys to move the cursor to the field you want. Then use the plus-and-minus
value keys to select a value for that field. To save value commands in the Exit Menu, save the values
displayed in all menus.
To display a submenu, use the arrow keys to move the cursor to the submenu you want. Then press
<Enter>. A pointer ( ) marks all sub-menus.
Use this menu for basic system configuration.
Use this menu to set the Advanced Features available on your system.
Use this menu to configure PCI and PnP features.
Use this menu to determine the booting device order.
Use this menu to configure Security features.
Use this menu to configure chipset features.
Use this menu to choose Exits option.
and
arrows keys to make a selection.
Legend Bar
General Help windows (see 4.1.2.2).
Exit this menu.
Select a different menu.
Move cursor to top or bottom of window.
Move cursor to top or bottom of window.
Select the Previous Value for the field.
Select the Next Value for the field.
Change colors used in Setup.
Disacard the changes for all menus.
Load the Failsafe Default Configuration values for all menus.
Load the Optimal Default Configuration values for all menus.
Save and exit.
Execute Command, display possible value for this field or Select the sub-menu.
Description
Function
5-3
AT8001 User's Guide
Advertisement
Table of Contents
