Table of Contents
Advertisement
5.1.2.5.7
Feature
Actual Fabric
LAN A Port
Display Only
State
Disabled
Fabric LAN A
Front Panel A
Port Setting
Fabric Ch1 Port 0
Actual Fabric
LAN B port
Display Only
State
Disabled
Fabric LAN B
Front Panel B
Port Setting
Fabric Ch2 Port 0
Actual FC A Port
Display Only
State
Disabled
FC A Port
Front Panel A
Setting
Fabric Ch1 Port 3
Actual FC B Port
Display Only
State
Disabled
FC B Port
Front Panel B
Setting
Fabric Ch2 Port 3
Actual AMC B1
Display Only
Port 0 State
Disabled
Front Panel A
AMC B1 Port 0
Fabric Ch1 Port 0
Setting
Fabric Ch1 Port 1
Fabric Ch1 Port 3
Actual AMC B1
Display Only
Port 1 State
Disabled
Front Panel B
AMC B1 Port 1
Fabric Ch2 Port 0
Setting
Fabric Ch2 Port 1
Fabric Ch2 Port 3
Actual AMC B2
Display Only
Port 0 State
Disabled
Front Panel A
AMC B2 Port 0
Fabric Ch1 Port 0
Setting
Fabric Ch1 Port 1
Fabric Ch1 Port 3
Actual AMC B2
Display Only
Port 1 State
Disabled
Front Panel B
AMC B2 Port 1
Fabric Ch2 Port 0
Setting
Fabric Ch2 Port 1
Fabric Ch2 Port 3
ATCA Channel Routing (PICMG)
Options
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
Display hardware actual state.
Select the front panel or backplane (ATCA) Channel connection.
Warning! To switch the ports to backplane, you need E-key
granting from ShMC. If the ShMC rejects the E-key request, the
ports will remain at Front.
5-16
Description
AT8001 User's Guide
Advertisement
Table of Contents
