Kontron AdvancedTCA AT8001 User Manual page 88

5.1.2.5.10
Feature
Console
Redirection Display only.
Jumper
Disabled
Remote Access
Enabled
Serial Port ICH COM1
number ICH COM2
115200 8,n,1
57600 8,n,1
Serial Port
38400 8,n,1
Mode
19200 8,n,1
09600 8,n,1
None
Flow Control Hardware
Software
Disabled
Redirection
Boot Loader
After BIOS POST
Always
ANSI
Terminal Type VT100
VT-UTF8
VT-UTF8 Combo Disabled
Key Support Enabled
Remote Access Configuration
Options
Display the hardware state of the Remote access jumper. The
jumper can overwrite the CMOS setting to enable the console
redirection.
Select Remote Access Type
Select Serial Port for console redirection
Make sure the selected port is enabled
Select Serial Port settings.
Select Flow Control for console redirection.
Disable: Turns off the redirection after POST
Boot Loader: Redirection is active during POST ans during Boot
Loader.
Always: Redirection is always active.
(Some OSs may not work if set to Always)
Select the target terminal type
Enable VT-UTF8 combination key Support for ANSI/VT100
terminals.
5-18
Description
AT8001 User's Guide