Table of Contents
Advertisement
3.4.2
Front Plate Connectors and Indicators
Name
Description
J1
SFP Channel A
J2
SFP Channel B
Ethernet
J3
Management
J4
USB 0
J5
Serial Port
J6
VGA
AMC B1
&
AMC B2
PMC & Hard Disk
Comments
Small form factor pluggable module.
Use an appropriate module
depending on the data that will be
routed to the SFP from the cross
point switch. Kontron provides 2Gb
module that will work for Fibre
channel and gigabit Ethernet
Same as above.
10/100Mbit, standard RJ-45
connector.
4-Pin standard USB connector
Standard 8-pin RJ-45 connector
Micro DB-15. Use provided cable
adapter to connect a monitor
Slot for full heigh half width AMC
type B+. When no AMC used, a filler
shall be installed.
The front plate supports a PMC
cutout and a cap that also acts as an
EMI shield when there is no PMC
device installed.
3-6
AT8001 User's Guide
Advertisement
Table of Contents
