“as-is” and is subject to change without notice. For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or other rights of third parties are concerned.
This Kontron Embedded Modules GmbH product is warranted against defects in material and workmanship for the warranty period from the date of shipment. During the warranty period, Kontron Embedded Modules GmbH will at its discretion decide to repair or replace defective products.
Introduction ADA-SDVO-PEG16 The adapter card ADA-SDVO-PEG16 is an add-on card for modules with onboard 30pin FFC30 SDVO out. The adapter provides Serial DVO on a PCI Express Graphics Port PEG16 to use with separate standard ADD2 cards. Currently the adapter is supported by: »...
ADA-SDVO-PEG16 / Specification Accessories Following optional accessories are available and compatible to the SDVO-PEG16 adapter card: Part. No Product Function 820954 ADD2-CRT-Internal SDVO to CRT internal on PEG port ADD2-CRT-Internal on kontron.com 820953 ADD2-LVDS-Internal SDVO to LVDS internal on PEG port ADD2-LVDS-Internal on kontron.com...
ADA-SDVO-PEG16 / Specification Mechanical Specification The size of the SDVO-PEG16 card is 95mm x 38mm. The maximum height on top is 11.6mm and defined by the PEG16 slot Electrical Specification 3.5.1 Supply Voltage » 12V Input: 12V ±5% DC »...
ADA-SDVO-PEG16 / Connector description and schematics External power input From SDVO only 3.3V is supplied to the PEG port. An external power input is available on standard connector J3 to connect external power if 12V is required for the components on ADD2 cards.
Page 14
ADA-SDVO-PEG16 / Revision History Revision History Revision Date Edited by Changes 14-Jul-10 Initial release Corporate Offices Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Germany Beijing 100070, P.R.China...