Table of Contents
Advertisement
Board Specifications (continued)
•
•
•
•
•
•
•
BIOS Features
•
•
•
•
•
•
•
•
•
•
•
•
IPMI Features
•
•
•
•
•
•
•
•
Supervisory
•
•
OS Compatibility
•
Mechanical
•
Typical 120W
Power Requirements
Maximum 200W with 2 AMC*
* 55°C operation might not be possible with all AMC combinations.
AMI BIOS
Save CMOS in Flash option
Boot from gigabit Ethernet (Base and Fabric)
Boot from USB 2.0 (floppy, CD-Rom, hard disk)
Auto configuration, extended setup and VGA disable by jumper
Diskless, keyboard less, and video less operation extensions
System, video and LAN BIOS shadowing
HDD S.M.A.R.T. support
Advanced Configuration and Power Interface (ACPI 1.0b and 2.0)
Advanced thermal management such as resume, overheat and auto slow down with
CPU build-in Thermal Control Circuit
Setup console redirection to serial port (VT100 mode) with CMOS setup access
Redundant Field-updateable BIOS
Event (SERR, PERR, Memory SBE, POST errors) log support to IPMC
Management Controller compliant to PICMG 3.0, AMC.0 R1.0 and IPMI v1.5 rev 1.1.
Management Controller is run time field reprogrammable without payload impact.
Robust fail safe reprogramming implementation (which includes two firmware images)
that could perform automatic or manual rollback if a problem occurs during critical
reprogramming phase.
Remote upgrade capability from all IPMI interfaces (CPU Host Interface/IPMB-0/LAN).
Management Controller self test which can detect failure under its code integrity and
trig an automatic rollback.
Can initiate a Host CPU reboot on a redundant BIOS image base on a BIOS-IPMC
handshake result.
Fast interrupt driven SMS host interface compliant to IPMI-KCS v1.5 rev 1.1
Serial Over LAN (SOL) redirection of the Host CPU serial controller traffic to enable
asynchronous serial-based OS and pre-OS communication via standard RMCP LAN
application through the Management Controller.
Standard Management Controller message bridging to AMC via IPMB-L
Management Controller support standard PCI Hot Plug for PCI-Express AMC.
Management Controller can initiate standard graceful OS shutdown via ACPI support.
Hardware config that allow activation of the blade or AMC without Shelf Manager
intervention.
Support a system management interface via an IPMI V1.5 compliant controller
Watchdog for BIOS execution and OS loading (through IPMI watchdog)
Hardware system monitor through IPMI (voltages,current, powertemperature), CPU
temperature monitor / alarm; board temperature sensor, power failure,
MontaVista Linux Carrier Grade Edition Version3.1
Board is an 8U form factor mechanically compliant to PICMG3.0:
322.25mm x 280.00mm (12.687" x 11.024").
Board pitch is 6HP.
1-4
AT8001 User's Guide
Advertisement
Table of Contents
