B - Kontron Extension Registers - Kontron AdvancedTCA AT8001 User Manual

B. Kontron Extension Registers
B.1 FPGA/CPLD REGISTERS DEFINITION
Unused bits are reserved. To insure compatibility with other product and upgrades to this product,
do not modify unused bits. Bits marked NU are not used on this board. Writing to such bit does
nothing and reading is undefined, either 0 or 1 may be returned.
Legend:
Symbol
U
X
NU
B.2 OVERVIEW
FPGA/CPLD registers
Address
80h
81h
A00h
A01h
A02h
A03h
A04h
A05-A07h
A08h
A09h
A0Ah
A0Bh
A0Ch
A0Dh
A0Eh
A0Fh
A10-A1Fh
* Those registers depend on a manufacturing option..
Signification
= Unchanged (stay unchanged after reset)
= Not Defined (bit not used on this board)
= Not Used
Extended POST code (16-bit write only)
FWUM control (for manufacturing / update use)
Development Features (for development only)
*TelcoClock option register 0: configuration
*TelcoClock option register 1: configuration
*TelcoClock option register 2: configuration & status
*TelcoClock option register 3: configuration
*TelcoClock option register 4: reset and test modes
*TelcoClock option register 5: PLD version
*TelcoClock option register 6: Alarms
*TelcoClock option register 7: Interrupt number
Content
POST code
FPGA version
Debug LED control
Reserved
Reserved
Reserved
B-1
AT8001 User's Guide