Table of Contents
Advertisement
Unpacking
Follow these recommendations while unpacking:
♦ Remove all items from the box. If any items listed on the purchase order are missing,
notify Kontron customer service immediately.
♦ Inspect the product for damage. If there is damage, notify Kontron customer service
immediately.
♦
Save the box and packing material for possible future shipment.
Powering Up the System
Before any installation or setup, ensure that the board is unplugged from power sources or
subsystems.
If you encounter a problem, verify the following items:
♦ Make sure that all connectors are properly connected.
♦ Verify your boot devices.
♦ If the system does not start properly, try booting without any other I/O peripherals
attached, including AMC or PMC adapters.
If you still cannot start your system, please refer to the Emergency Procedure in the Appendix
Section of this User's Guide.
Make sure your system provides the minimum DC voltages required at the board's slot, especially if
DC power is carried by cables.
If you are still not able to get your board running, contact our Technical Support for assistance.
xiv
AT8001 User's Guide
Advertisement
Table of Contents
