Al Alignment Length; As Single Byte Symbol Set; Av Avalanche Enabled Parameters - Honeywell E-Class Series User Manual

UN Plug and Play ID Type
l
UT User Terminator
l
VE Verifier Equipped
l

AL Alignment Length

This command, critical for small labels when Label Alignment is set to YES, allows a
length (measured from leading edge to leading edge of two successive labels) to be
entered. The measured length must be provided to the nearest hundredth of an inch.
For very small labels, errors of 0.01" can result in noticeable print variations on the
labels between the media sensor and the print head. The number of labels that can be
fit between the Media Sensor and the print head will magnify any error in label
alignment length. Errors in measurement are more favorable on the low side rather
than the high side.
Parameter
Value / Range:
Units / Interpretation:
Command Equivalent:

AS Single Byte Symbol Set

This command allows for a default single-byte symbol set.
Parameter
Value / Range:
Units / Interpretation:
Command Equivalent:

AV Avalanche Enabled Parameters

This command allows the printer to be configured for the Avalanche utility.
Parameter
Value / Range:
Units / Interpretation:
Command Equivalent:
Syntax
<stx>KcAV[nnn1,vvvv1:nnn2,vvvv2:...,nnnn,vvvvn:];
DPL Command Reference
AL
0 - 999
1/100 in.
N/A
AS
2 Byte Alpha Character
AA – ZZ, printer resident symbol set
<STX>y, ySxx
AV
See Syntax below.
See Syntax below.
N/A
71