Ps Present Sensor Equipped; Ps Print Speed; Pt Tear Position - Honeywell E-Class Series User Manual

Parameter
Value / Range:
Units / Interpretation:
Command Equivalent:
Value
X
Z

PS Present Sensor Equipped

This command allows the printer to sense the present sensor option. See
Software Switch Settings
Parameter
Value / Range:
Units / Interpretation:
Command Equivalent:
A or Y - automatically senses device presence; if undetected, no error will be gen-
l
erated.
E - enables the device, where its presence must be detected; otherwise, a fault is
l
generated.
N or D - disables device detection.
l

pS Print Speed

See the
Parameter:
Value / Range:
Units / Interpretation:
Command Equivalent:

PT Tear Position

This command sets the label stopping location at the tear plate on the printer's cover.
DPL Command Reference
Parallel Direction Units / Interpretation
Port ID
Direction:
U - unidirectional, one-way communication
B - bidirectional, IEEE 1284 back-channel operation
for command details.
P Set Print Speed command for details.
PP
X, Z
See table below.
N/A
PS
A, D, E, N, Y
A or Y = Auto, E = Enabled, N or D = Disabled
<STX>V
pS
Alpha Character
Model specific ranges
P
STX V
111