Paper Loading And Alignment Procedure; Internalmechanics With Loaded Paper - Honeywell PRU7070 Handbook

Paper Loading and Alignment
Procedure
Operation
The printers have this easy procedure for loading paper:
1. Position the stack of paper behind the printer.
2. Ifusing single copy paper, take the top sheet of paper and fold it onto the
attached second sheet. This makes the loading procedure easier.
3. Open the printer by pulling the cover up and away from you.
4. With both hands, feed the folded paper into the paper chute (Figure 3-3)
located under the printer. Keep feeding the paper into the chute until you see
the top of the paper appear just above the protective plastic shield under the
platen. See Figures 2-4 and 3-4.
5. Turn on the printer to allow the printhead to position itself to the left of the
platen. This will happen automatically. Figure 3-4 shows the proper loading
position for the printhead.
Figure
3-4.
InternalMechanics with Loaded Paper
3-7
CY93-01