C###E Character Code - Honeywell E-Class Series User Manual

Parameters
Where:
### - Is the number of bytes of font descriptor data from 1 to 3 ASCII decimal
l
digits.
dd...d - Is the descriptor.
l

*c###E Character Code

This code is the ASCII decimal value corresponding to the next downloaded character.
Syntax
<ESC>*c###E
Parameters
Where:
### - Is the ASCII value of the character, three digits maximum, 0 to 999.
l
(s#W Character Download Data
This command contains all of the information for one downloaded character.
Syntax
<ESC>(s###Wnn...n
Parameters
Where:
### - Is the number of bytes of bitmapped data, three digits maximum, from 1 to
l
999.
nn...n - Is the bitmapped data.
l
157
DPL Command Reference