Honeywell E-Class Series User Manual page 28

Syntax
<SOH>F
Behavior
Printer response is:
X
l
Where: "X" is a hex value byte of data 0x00 through 0xEF with bits as indicated in the
"Condition" column below:
Bit*
8
7
6
5
4
3
2
1
*One is the least significant bit.
Limitations
For "Interpreter busy (imaging)", Honeywell behavior is not the same as CEE all the
time. Honeywell printers will set it to Y during printing and reset it to N after printing.
DPL Command Reference
Bit* Value
1 or 0
1 or 0
1 or 0
1 or 0
1 or 0
1 or 0
1 or 0
1 or 0
Condition
(Internal) Rewinder out or
fault
Label presented
Printer paused
Busy printing
Printing batch
Ribbon out or fault
Paper out or fault
Interpreter busy (imaging)
8