Operation
Figure
3-5.
Tmctor Adjustment
10. Align the paper perforation with the line indicator by using the line adjustment.
knob as shown in Figure 3-6.
11. Close the belt unit by lifting the unit at the belt unit cover.
12. Engage the tractors using the tractor engage switch.
13. Remove the sound baffie (ifprovided)at the rear of the printer.
14. Lift the power paper stacker table to its highest position.
15. Press the stacker PAPER ADVANCE button and then the printer FORM FEED
button until the first form can be placed flat on the paper table. Take care of
correct paper folding.
16. Adjust the paddle assemblies horizontally so that the distance between the vertical
paper guides corresponds to the form length.
17. Reinstall the printer sound baffie.
Figure
3-6.
Paper Alignment
3-6
CW99-00