•
Verification Length
Support maximum verification length up to 12 inches
Maximum Number of Barcodes per Label
A total of 32 barcodes can be scanned and verified per label. If the number of
barcodes on one label exceeds 32, the verifier system will show an error message.
Note: Preprinted barcodes and barcodes sent as graphic print jobs will not be verified.
Note: Only barcodes generated by printer language commands are supported for
verification.
Printing Behavior after Error Recovery
Possible printer error during printing & verification:
Printing Behavior after Recovered from error above:
1.
2.
The following diagrams show which labels will be reprinted in different scenarios.
Scenario 1
•
46
Minimum 2D barcode size: 15 mils
•
Printhead lifted
•
Front arm lifted
•
Next label not found
•
Out of media
•
Out of ribbon
•
Ribbon installed
No void printing. User will need to manually mark/discard the labels between
the verifier module and printhead.
Reprint all unverified labels and verification failed labels.
All blue labels will be reprinted and verified after error recovery.
PX940 User Guide