Dk Darkness; Dm Default Module; Dr Delay Rate; Ds Double Byte Symbol Set - Honeywell E-Class Series User Manual

DK Darkness

This command adjusts the length of the print head strobe to fine tune the HEAT
setting.
Parameter:
Value / Range:
Units / Interpretation:
Command Equivalent:

DM Default Module

See
Parameter:
Value / Range:
Units / Interpretation:
Command Equivalent:

DR Delay Rate

This command sets the number of minutes to delay between multiple batch printings
of Quick Test Labels. This command is provided as a diagnostic tool.
Parameter
Value / Range:
Units / Interpretation:
Command Equivalent:

DS Double Byte Symbol Set

See <STX>y or ySxx for command details.
Parameter:
Value / Range:
Units / Interpretation:
Command Equivalent:

EM Input Mode

This command determines the data processing mode:
DPL Command Reference
STX X Set Default Module
DK
1 - 64
N/A
N/A
for command details.
DM
A, B, D, or G
Module Letter
<STX>X
DR
0 - 120
Seconds
N/A
DS
2-byte alpha character
AA to ZZ printer resident symbol set ID
<STX>y, ySxx
83