Honeywell E-Class Series User Manual page 196

Note that if all format commands after the first FB+ were deleted the entire label
would have been printed with bold scalable fonts. This is what is meant by a state
change. Once invoked, that command is in affect until turned off or the label format is
terminated with the "E" "s" or the "X" command.
The second format attribute command is inserted into the text data stream and
delimited by the angle brackets "<>" This structure takes the form of \<command>. An
example of this command is as follows:
<STX>L
D11
A2
FA+
1911S0105000020P018P018DPL allows \<FP36FS36>FONT\<FS10FP10> sizes
\<FS8FP12>in the string
1911S0103500100P018P018\<FR80>D\<FR-5>P\<FR-5>L\<FR-5> \<FR-5>l\<FR-
5>e\<FR->t\<FR-5>s\<FR-5> \<FR-5>y\<FR-5>o\<FR-5>u\<FR-5> \<FR-5>w\<FR-
5>r\<FR-5>i\<FR-5>t\<FR-5>e\<FR-5> \<FR-5>i\<FR-5>n\<FR-5> \<FR-5>c\<FR-
5>i\<FR-5>r\<FR-5>c\<FR-5>l\<FR-5>e\<FR-5>s\<FR-5> \<FR-5>t\<FR-5>o\<FR-
5>o\<FR-5>!
1911S0102400040P018P018\<FR+45>DPL allows \<FB+>Rotations\<FB-FR-90> in
the string
1911S0102000040P018P018DPL allows \<FB+>BOLD\<FB-> in the string
FU+
1911S0101400040P018P012DPL allows \<FI+>ITALICS\<FI-> in the string
FI+U-
1911S0101000040P018P012DPL allows \<FB+I+>COMBINATIONS\<FB-I-> in the
string
FB+I-
1911S0100600040P018P018DPL allows \<FB+>BOLD\<FB-> in the string
FU+I+
1911S0100200040P018P018DPL allows \<FB+>BOLD\<FB-> in the string
FB-U-I-
E
The graphic is an example of the output from this DPL command stream. The user
has the ability to change the point and set size of the font within the DPL command
record. In addition, the angle of the baseline may be specified relative to the current
orientation of the record. (For example, the command \<FR+45> will rotate the
baseline forty five degrees in the positive direction from the default print direction.)
DPL Command Reference
176