Table of Contents
Advertisement
Value
Units / Interpretation
ALn
where n:
Bn
where n:
DIhh
where hh:
DLn
where n:
En
where n:
Lhh
where hh:
Mn
where n:
Nn
where n:
114
RFID Configuration Definition / Function
E = Enable
Allows locking the AFI after writing (HF only).
D = Disable
Disables padding or truncating of data (EPC only).
Nulls are represented as "00".
For Hex EPC data a 96-bit tag size is 24 characters and 64-bit is
D = Disable
16.
For ASCII EPC data a 96-bit tag size is 12 characters and 64-bit
is 8.
If the data is less than the selected EPC tag data size, nulls will
1 = Leading
be added to the front (left); or, if too much data is given, the data
will be cut.
If the data is less than the selected EPC tag data size, nulls will
2 = Trailing
be added to the back (right); or, if too much data is given, the
data will be cut.
2-Chararacter
Sets the Data Storage Format Identifier (DSFID), HF only.
Hex ID
E = Enable
Allows locking the DSFID after writing (HF only).
D = Disable
E = Enable
Allows erasures of the tag on error (HF only).
D = Disable
2-Chararacter
Sets the Lock Code (Alien UHF only).
Hex ID
D = Disable
Disables the RFID module. ("N" is also a valid disabler.)
H = HF
Enables the RFID module for HF (Securakey).
U = UHF
Enables the RFID module for UHF Class 1 (Alien).
M = UHF
Enables the RFID module for UHF Multiprotocol.
64 = 64-bit
Sets the UHF tag data size (Multiprotocol UHF only).
96 = 96-bit
DPL Command Reference
Advertisement
Table of Contents
