Barcode Format Record Structure - Honeywell E-Class Series User Manual

W1C DataMatrix Barcode with Byte Count Specifier
l
W1d / W1D QR Code Barcode
l
W1f / W1F Aztec Barcode
l
W1g / W1G: USD-8 (Code 11) Barcode
l
W1I EAN128 Barcode (with Auto Subset Switching)
l
W1J Code 128 Barcode (with Auto Subset Switching)
l
W1k GS1 DataBar Barcode
l
W1L Planet Code Barcode
l
W1m / W1M Australia Post 4-State Barcode
l
W1N-W1n Industrial 2 of 5 Barcode
l
W1p Intelligent Mail Barcode (IMB)
l
W1q CODABLOCK Barcode
l
W1R UCC/EAN Code 128 K-MART NON EDI Barcode
l
W1s-W1S Standard 2 of 5 Barcode
l
W1t TCIF Linked 3 of 9 (TLC39)
l
W1Y-W1y Code 16K Barcode
l
W1z MicroPDF417 Barcode
l
W1Z Micro PDF417 Barcode with Byte Count Specifier
l

Barcode Format Record Structure

Valid inputs for the barcode field b are letters: uppercase letters will print a human-
readable text below the barcode; lowercase letters will only print the barcode. For
example, entering a "p" in the b field selects the Postnet barcode. Because the Postnet
font does not provide human-readable data, the uppercase P is not valid. Other
barcodes without a human-readable counterpart include u (MaxiCode) and z
(PDF417). See
For module-based barcodes, field d is the narrow bar width in dots (barcode module
size). For consistent results in all rotations for barcodes of this type, field d and field c
must have the same value. For ratio-based barcodes field c is the wide bar width in
dots (the numerator); field d is the narrow bar width in dots (the denominator).
The eee height field represents the barcode (symbol) height. The valid range (001 to
999) translates to bar heights ranging from .01 inch (.254 mm) to 9.99 inches (253.7
mm). For barcodes that require additional specified parameters, use the jj...j data field
as the location for these parameters.
Syntax
abcd eee ffff gggg jj...j <CR>
178
Barcode Summary Data for additional model-specific restrictions.
DPL Command Reference