En End Character - Honeywell E-Class Series User Manual

Parameter:
Value / Range:
Units / Interpretation:
Command Equivalent:
Value
0
1
3
5
7
8
9
10
11

EN End Character

This command terminates a <STX>Kc string.
Parameter:
Value / Range:
Units / Interpretation:
Command Equivalent:
84
Interpretation Input Mode Interpretation
DPL Character strings are parsed for standard DPL processing.
No parsing occurs; instead, each carriage return (<CR>) ter-
Line minated data line is printed according to a stored template
(see
Character strings are parsed for PL-Z processing,
applicable only if the appropriate firmware is installed, as
indicated by a "Z" in the version string.
PL-Z
For RFID, the hardware option, tag type and size should be
preselected, and a tag calibration performed. Also, if
possible, driver/software options to use "Printer Defaults"
should be chosen to minimize potential conflicts.
PL-I
Character strings are parsed for PL-B processing,
PL-B applicable only if the appropriate firmware is installed, as
indicated by a "B" in the version string.
PL-E
Character strings are automatically parsed and processed
according to the identified language.
Auto
A clean file is required, where extra leading characters may
cause the language to be unrecognizable; otherwise, the
appropriate Input Mode must be selected.
CPCL
O'Neil EZ Print
EM
See table below.
See table below.
N/A
RFID Overview).
EN
D
N/A
N/A
DPL Command Reference