Table of Contents
Advertisement
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Zoom window. You can also click or tap the input field to input the specific value
directly via the pop-up numeric keypad.
•
Zoomed Position: Rotate the corresponding multipurpose knob or use the icons
at the right of the Position input field to increase or decrease the position for
the Zoom window. You can also click or tap the input field to input the specific
value directly via the pop-up numeric keypad.
When the Zoom mode is enabled, the display divides in half, as shown in the figure
below.
•
Waveform before expansion:
The upper portion of the display that is not covered by subtransparent gray
shows the normal display of the waveform. Its horizontal time base (called the
main time base) is indicated in the label at the upper-left corner of the display.
You can move the area left and right by adjusting the horizontal position and
increase or decrease the size of the area by adjusting the horizontal scale.
•
Waveform after expansion:
The lower portion shows the horizontally expanded version of the normal
waveform display. Its horizontal time base (called the zoomed time base) is
displayed in the middle. Compared with the main time base, the zoomed time
base has higher horizontal resolution.
TIP
The zoomed time base should be smaller than or equal to the main time base.
www.calcert.com
15
10
20
5
25
0
30
Figure 6.2 Zoom Mode
Horizontal System
sales@calcert.com
DHO1000 User Guide
Advertisement
Table of Contents
