Table of Contents
Advertisement
System Utility Function Setting
20.9
1.888.610.7664
DHO1000 User Guide
After setup, click or tap the
perform the waveform recording.
Save Group
•
Click or tap Save Group, then Operation is set to "Save Group".
•
Under Save Group, select one or more items from "Save Image", "Save Wave",
and "Save Setup".
After setup, click or tap the
save the selected items based on the settings. The location where the file is saved
depends on the File Path setting in Storage menu. For details, please refer to
a File
.
Self-check
In Utility menu, click or tap Self Check to enter the "Self Check" setting. You can test
the following self-check items for the device.
Key Test
Click or tap Key Test to enter the key test interface (virtual front-panel key), as shown
in the figure below.
At this time, you can press the front-panel keys to check whether the virtual keys are
highlighted. If yes, it indicates that the keys work normally; if no, it indicates that
www.calcert.com
15
10
20
5
25
0
30
key at the upper-right corner of the front panel to
key at the upper-right corner of the front panel to
Figure 20.3 Key Test Interface
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Save
sales@calcert.com
Advertisement
Table of Contents
