Table of Contents
Advertisement
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Menu
2X
5X
10X
20X
50X
100X
200X
500X
1000X
2000X
5000X
10000X
20000X
50000X
TIP
The oscilloscope auto-recognizes certain probes with a fixed attenuation ratio. After that, the
probe ratio will also be auto recognized to save you from configuring it manually.
Skew
The difference in the delays between the probes, known as skew, can cause great
cable-delay errors in measurement results. To eliminate this problem, this series
oscilloscope provides the deskew function. Click or tap the Skew input field to set the
delay time with the pop-up numeric keypad. You can also use the corresponding
numeric keypad to set the value. The value ranges from -100.00 ns to 100.00 ns, and
the default is 0.00 s.
Go Back to the Vertical Menu
In the Probe setting menu, click or tap Vertical to go back to the Vertical menu.
www.calcert.com
15
10
20
5
25
0
30
Attenuation
(display amplitude of the signal: actual
amplitude of the signal)
2:1
5:1
10:1
20:1
50:1
100:1
200:1
500:1
1000:1
2000:1
5000:1
10000:1
20000:1
50000:1
Vertical System
sales@calcert.com
DHO1000 User Guide
Advertisement
Table of Contents
