Figure 8.25 Rs232 Trigger Setting Menu - Rigol DHO1000 Series User Manual

Triggering the Oscilloscope
1.888.610.7664
DHO1000 User Guide
Trigger Type
Click or tap the drop-down button of Type to select "RS232".

Figure 8.25 RS232 Trigger Setting Menu

After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Source Selection
Click or tap the drop-down button of Source to select CH1-CH4. For details, refer to
Trigger Source
descriptions in
information label at the top of the screen.
Only when you select the channel that has signal inputs as the trigger source, can you
obtain a stable trigger.
Polarity
Select the polarity of data transmission in the Polarity item. It can be set to "Positive"
or "Negative" .
Trigger Condition
Set the desired trigger condition in the When item.
www.calcert.com
15
10 20
5 25
0 30
. The selected trigger source is indicated in the trigger
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
sales@calcert.com