Table of Contents
Advertisement
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
field of Timeout, and then use the pop-up numeric keypad to set the timeout
value. You can also use the corresponding multipurpose knob to set the value.
The adjustable range of the timeout value is from 8 ns to 10 s. By default, it is 1
μs.
•
CS:
It contains a chip select line (CS). You can perform frame synchronization
according to CS. When "CS" is selected,
-
Click or tap drop-down button of CS to select the desired source. The
sources include CH1-CH4.
-
Click or tap the input field of the Threshold to set the threshold with the
pop-up numeric keypad. You can also use the corresponding multipurpose
knob to set the value.
-
In CS Polarity, select "Positive" or "Negative".
Endian
Click or tap the drop-down button of Endian to select the desired endian.
•
LSB: indicates Least Significant Bit transmission sequence, i.e. the lowest bit of
the data is transmitted first.
•
MSB: indicates Most Significant Bit transmission sequence, i.e. the highest bit of
the data is transmitted first.
t
LSB
Polarity
In Polarity, select "Positive" or "Negative".
Width Setting
Click or tap the input field of Width, and then use the pop-up numeric keypad to set
the bits of each frame of data. You can also use the corresponding multipurpose knob
to set the value. The setting range is from 4 to 32. By default, it is 8.
www.calcert.com
15
10
20
5
25
0
30
Protocol Decoding
t
MSB
sales@calcert.com
DHO1000 User Guide
Advertisement
Table of Contents
