Table of Contents
Advertisement
14.6.1
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bus Status
Click or tap the Bus Status on/off switch to enable or disable the bus decoding.
Quickly Apply Trigger Settings to Decoding
Copy trig indicates applying the trigger settings to the specified decoding setting.
Click or tap Copy Trig to apply the trigger settings to the specified decoding setting.
Signal Configuration
Set the source and the threshold
•
Click or tap drop-down button of Source to select the desired source. The
sources include CH1-CH4.
•
Click or tap the input field of Threshold, and then use the pop-up numeric
keypad to set the threshold of the source channel. You can also use the
corresponding multipurpose knob to set the value.
When you modify the threshold of the signal source, a dotted line displaying the
current threshold level is displayed on the screen. It disappears in about 2 s after
you stop modifying the threshold.
Set the Signal
•
Click or tap the drop-down button of Baud Rate to select the baud rate. The
available baud rates include 2.4 kbps, 4.8 kbps, 9.6 kbps, 10.0 kbps, 19.2 kbps,
and etc. You can also self-define the baud rate.
•
In Parity bit, click or tap "With" or "Without" to select whether the data
contain the parity bit.
www.calcert.com
15
10
20
5
25
0
30
Figure 14.16 LIN Decoding Menu
Protocol Decoding
sales@calcert.com
DHO1000 User Guide
Advertisement
Table of Contents
