Figure 8.20 Setup/Hold Trigger; Figure 8.21 Setup/Hold Trigger Setting Menu - Rigol DHO1000 Series User Manual

1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
T1
Data Source
Edage
Clock Source
Trigger Type
Click or tap the drop-down button of Type to select "Setup/Hold".

Figure 8.21 Setup/Hold Trigger Setting Menu

After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
www.calcert.com
15
10 20
5 25
0 30
T2

Figure 8.20 Setup/Hold Trigger

Triggering the Oscilloscope
T1 is the setup time
T2 is the hold time
The data type is H
sales@calcert.com
DHO1000 User Guide