Choose Event To View; Print This Event; Delete This Event; Delete All Frozen Waveforms - GE Dash 2500 Operator's Manual

choose event to view

print this event

delete this event

delete all frozen waveforms

System Fault Alarm

4-12
Alarms: System Fault Alarm
This option lets you choose to display an event's frozen waveform.
This option lets you print the chosen event's frozen waveform. It is available
when the printer is not busy and a stored event has been chosen.
This option lets you delete the chosen event.
For the events listed, choosing this option deletes the frozen waveforms that are
stored for those events. These events will no longer be displayed in the Events
with Frozen Waveforms window.If this event is still one of the most recent 200
patient events, it will continue to appear in the Patient Event History window.
An asterisk (*) will no longer appear in its waveform column.
If a system fault occurs, you will hear a constant tone and the screen will be
blanked within 5 seconds. The cause of the system fault is stored in the system
events as a fault code.
How to respond to a System Fault Alarm
1. If the Monitor is alarming, turn it off.
2. Contact GE Medical Systems Information Technologies Technical Support at
1-800-558-7044 (USA) or contact your local representative.
Dash 2500 Patient Monitor 2042480-001 C