Spo2 Menu; Turn Parameter Off; View Waveform; Adjust Limits - GE Dash 2500 Operator's Manual

SpO Menu
2

turn parameter off

View waveform?

Adjust limits

2042480-001 C
NELLCOR® OXIMAX® SpO2: SpO2 Menu
This option lets you suspend all monitoring and alarms for SpO
select this option, no vital sign area is allocated to SpO
offline-SpO2 appears in the setup parameters option. To resume monitoring,
select offline-SpO2 from the setup parameters option.
NOTE: SpO
alarms can only be terminated by either: 1) correcting the cause
2
of the alarm, 2) turning the parameter off, or 3) if in spot check, simply
acknowledge the alarm.
You can choose this option to have the plethysmographic waveform appear on
the screen. Select yes or no.
The alarm limits for SpO
2
following tables. Select hi to change the high alarm limit and lo to change the
low alarm limit. The system maintains appropriate separation between the high
and low limits.
Dash 2500 Patient Monitor
oxygen saturation and SpO
When you
2.
, and the message
2
PR are shown in the
2
12-7