DOS Mode Control + X Mode On with
Turbo Mode: The scanner sends characters to a terminal faster. If the terminal drops
characters, do not use Turbo Mode. Default = Off.
Numeric Keypad Mode: Sends numeric characters as if entered from a numeric keypad.
Default = Off.
RS232 Modifiers
RS232 Baud Rate
Baud Rate sends the data from the scanner to the terminal at the specified rate. The host
terminal must be set for the same baud rate as the scanner. Default = 115,200.
18
DOS Mode Control + X Mode On
Windows Mode Prefix/Suffix
Turbo Mode On
Numeric Keypad Mode On
* Control + X Mode Off
Windows Mode Prefix/Suffix
Supports ALT 3 Digit HEX Mode
* Turbo Mode Off
* Numeric Keypad Mode Off
HH1800 User Guide