Honeywell HH1800 User Manual page 79

Using the barcode above, send all characters up to but not including "AB."
Command string: B900024142
B9 is the "Send all characters up to a string" command
0002 is the length of the string (2 characters)
41 is the hex value for A
42 is the hex value for B
The data is output as: 1234567890
Send all but the last characters
E9 Include in the output message all but the last "nn" characters, starting from the current cursor
position. The cursor is moved forward to one position past the last input message character
included. Syntax = E9nn where nn stands for the numeric value (00-99) for the number of
characters that will not be sent at the end of the message.
Insert a character multiple times
F4 Send "xx" character "nn" times in the output message, leaving the cursor in the current
position. Syntax = F4xxnn where xx stands for the insert character's hex value for its ASCII
code, and nn is the numeric value (00-99) for the number of times it should be sent. Refer to
the
character codes.
E9 and F4 Example: Send all but the last characters, followed by 2 tabs
Send all characters except for the last 8 from the barcode above, followed by 2 tabs.
Command string: E908F40902
E9 is the "Send all but the last characters" command
08 is the number of characters at the end to ignore
F4 is the "Insert a character multiple times" commandx
09 is the hex value for a horizontal tab
02 is the number of times the tab character is sent
The data is output as: 1234567890AB <tab><tab>
HH1800 User Guide
ASCII Conversion Chart (Code Page 1252), beginning on page 203 for decimal, hex and
65