Ean-13 Beginning With 979 Addenda Required; Addenda Timeout; Ean/Jan-13 Addenda Separator - Honeywell HH1800 User Manual

EAN-13 Beginning with 979 Addenda Required

These settings program the scanner to require a 5 digit addenda only on EAN-13 barcodes
that begin with "979." The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 barcodes that begin with "979" must have a 5 digit
addendum. The EAN-13 barcode with the 5 digit addendum is then transmitted as a single,
concatenated barcode. If a 5 digit addendum is not found within the
period, the EAN-13 barcode is discarded.
Don't Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda, and you want
to disable this feature, scan Don't Require 5 Digit Addenda. EAN-13 barcodes are
transmitted, depending on the setting you are using for
Default = Don't Require 5 Digit Addenda.

Addenda Timeout

You can set a time during which the scanner looks for an addenda. If an addenda is not found
within this time period, the data can be either transmitted or discarded, based on the setting
you are using for
timeout by scanning the barcode below, then setting the timeout (from 0-120 milliseconds)
by scanning digits from the
Save. Default = 120.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.

EAN/JAN-13 Addenda Separator

When this feature is On, there is a space between the data from the barcode and the data
from the addenda. When turned Off, there is no space. Default = On.
114
* Don't Require 5 Digit Addenda
EAN/JAN-13 Addenda Required. Set the length (in milliseconds) for this
Programming Chart, beginning on page 211 of this manual, then
Addenda Timeout
Require 5 Digit Addenda
Addenda Timeout
EAN/JAN-13 Addenda Required.
Require 5 Digit Addenda
HH1800 User Guide