Good Read Delay; User-Specified Good Read Delay; Trigger Modes; Manual Trigger - Honeywell HH1800 User Manual

Good Read Delay

This sets the minimum amount of time before the scanner can read another barcode. Default
= 0 ms (No Delay).

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the barcode below, then set
the delay (from 0 - 30,000 milliseconds) by scanning digits from the
beginning on page 211, then Save.

Trigger Modes

Manual Trigger

When in manual trigger mode, the scanner scans until a barcode is read, or until the trigger is
released. Two modes are available, Normal and Enhanced. Normal mode offers good scan
speed and the longest working ranges (depth of field). Enhanced mode will give you the
highest possible scan speed but slightly less range than Normal mode. Enhanced mode is best
used when you require a very fast scan speed and don't require a long working range. Default
= Manual Trigger- Normal.
HH1800 User Guide
* No Delay
Medium Delay (1,000 ms)
* Manual Trigger - Normal
User-Specified Good Read Delay
Short Delay (500 ms)
Long Delay (1,500 ms)
Programming Chart,
Manual Trigger - Enhanced
27