QR Code Page
QR Code pages define the mapping of character codes to characters. If the data received does
not display with the proper characters, it may be because the barcode being scanned was
created using a code page that is different from the one the host program is expecting. If this
is the case, scan the barcode below, select the code page with which the barcodes were
created (see
the Save barcode from the
should then appear properly.
DotCode
DotCode On/Off
HH1800 User Guide
Point and Shoot
ISO 2022/ISO 646 Character Replacements
Programming Chart,
< Default All DotCode Settings >
On
on page 208), and scan the value and
beginning on page 211. The data characters
QR Code Page
Swipe
Off
* Off
129