Codabar Concatenation; Codabar Message Length; Code 39 - Honeywell HH1800 User Manual

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatenation, the scanner looks
for a Codabar symbol having a "D" start character, adjacent to a symbol having a "D" stop
character. In this case the two messages are concatenated into one with the "D" characters
omitted.
Select Require to prevent the scanner from decoding a single "D" Codabar symbol without its
companion. This selection has no effect on Codabar symbols without Stop/Start D characters.

Codabar Message Length

Scan the barcodes below to change the message length. Refer to
(page 81) for additional information. Minimum and Maximum lengths = 2-60. Minimum
Default = 4, Maximum Default = 60.

Code 39

84
A 1 2 3 4 D D 5 6 7 8 A
On
Require
Minimum Message Length
< Default All Code 39 Settings >
* Off
Message Length Description
Maximum Message Length
HH1800 User Guide