Usb Hid; Usb Serial; Cts/Rts Emulation - Honeywell HH1800 User Manual

USB HID

Scan the following code to program the scanner for USB HID Barcode scanners.

USB Serial

If you are using a Microsoft® Windows® PC, you will need to download the latest driver from
the Honeywell website
Software. The driver will use the next available COM Port number. Apple® Macintosh
computers recognize the scanner as a USB CDC class device and automatically use a class
driver.
After the driver is downloaded, scan the following code to program the scanner to emulate a
regular RS232-based COM Port.
No extra configuration (e.g., baud rate) is necessary.
Note: If you scan the USB Serial barcode either with an older Honeywell serial driver, or no driver
installed, you may no longer be able to scan barcodes. If this happens, either uninstall the
older driver versions and install the latest driver or delete the specific device entry in Device
Manager.

CTS/RTS Emulation

HH1800 User Guide
(www.honeywellaidc.com)
CTS/RTS Emulation On
USB HID Barcode Scanner
and go to Get Resources - Downloads -
USB Serial
* CTS/RTS Emulation Off
7