Code 128 Redundancy; Code 128 Message Length - Honeywell HH1800 User Manual

blood product label. Use the barcodes below to turn concatenation on or off. Default =Off.

Code 128 Redundancy

If you are encountering errors when reading Code 128 barcodes, you may want to adjust the
redundancy count. Redundancy adjusts the number of times a barcode is decoded before
transmission, which may reduce the number of errors. Note that the higher the redundancy
count, the longer it will take to decode the barcode. To adjust the redundancy, scan the Code
128 Redundancy barcode below, then scan a redundancy count between 0 and 10 on the
Programming Chart,

Code 128 Message Length

Scan the barcodes below to change the message length. Refer to
(page 82) for additional information. Minimum and Maximum lengths = 0-80. Minimum
Default = 0, Maximum Default = 80.
HH1800 User Guide
On
beginning on page 211. Then scan the Save barcode. Default = 0.
Minimum Message Length
Code 128 Redundancy
* Off
Message Length Description
Maximum Message Length
97