Step 2 - Ship A Picture Using Imgshp; Image Ship - Imgshp; Imgshp Modifiers - Honeywell HH1800 User Manual

Step 2 - Ship a Picture Using IMGSHP

Image Ship - IMGSHP

An image is taken whenever the trigger is pressed or when the Image Snap (IMGSNP)
command is processed. The last image is always stored in memory. You can "ship" the image
by using the IMGSHP command.
The image ship commands have many different modifiers that can be used to change the look
of the image output. Modifiers affect the image that is transmitted, but do not affect the
image in memory. Any number of modifiers may be appended to the IMGSHP command.
Example: You can use the following command to snap and ship a bitmap image with gamma correction
and document image filtering: IMGSNP;IMGSHP8F75K26U.

IMGSHP Modifiers

A - Infinity Filter
Enhances pictures taken from very long distances (greater than 10 feet or 3m). The Infinity
Filter should not be used with
Example:
Infinity Filter off (0A)
from approximately 12 feet (3.66m)
away:
150
0A Infinity filter off (default)
1A Infinity filter on
IMGSNP Modifiers (page 145).
Infinity Filter on (1A)
from approximately 12 feet (3.66m)
away:
HH1800 User Guide