Code 93
Code 93 On/Off
Code 93 Message Length
Scan the barcodes below to change the message length. Refer to
(page 82)
Default = 0, Maximum Default = 80.
Code 93 Append
This function allows the scanner to append the data from several Code 93 barcodes together
before transmitting them to the host computer. When this function is enabled, the scanner
stores those Code 93 barcodes that start with a space (excluding the start and stop symbols),
and does not immediately transmit the data. The scanner stores the data in the order in
which the barcodes are read, deleting the first space from each. The scanner transmits the
HH1800 User Guide
* On
for additional information. Minimum and Maximum lengths = 0-80. Minimum
Minimum Message Length
< Default All Code 93 Settings >
Maximum Message Length
Off
Message Length Description
Maximum Message Length
91