In-Stand Sensor Mode - Honeywell HH1800 User Manual

Note: A barcode needs only to be touched by the centering window in order to be read. It does not
need to pass completely through the centering window.
Scan Presentation Centering On, then scan one of the following barcodes to change the top,
bottom, left, or right of the centering window. Then scan the percent you want to shift the
centering window from the
Presentation Centering = 40% for Top and Left, 60% for Bottom and Right.
Top of Presentation Centering Window
Left of Presentation Centering Window

In-Stand Sensor Mode

This feature senses when the scanner is removed from the stand and tells it to begin manual
triggering. When Sensor On is enabled, the scanner defaults to Presentation Mode when it is
in the stand, and to Manual Trigger Mode when it is removed from the stand. Default =
Sensor On.
30
Presentation Centering On
Programming Chart, beginning on page 211, then Save. Default
* Presentation Centering Off
Bottom of Presentation Centering
Window
Right of Presentation Centering
Window
HH1800 User Guide