Move Commands - Honeywell HH1800 User Manual

Insert key strokes
B5 Insert a key stroke or combination of key strokes. Key strokes are dependent on your
keyboard (see Keyboard Key References on page 309). Any key can be inserted, including
arrows and functions. Syntax = 5CB5xxssnn where xx is the number of keys pressed (without
key modifiers), ss is the key modifier from the table below, and nn is the key number from the
Keyboard Key References, page 239.
For example, B501021F inserts an "A" on a 104 key, U.S. style keyboard. B5 = the command,
01 = number of key press events (without the key modifier), 02 is the key modifier for Shift
Right, and 1F is the "a" key. If a lower case "a" were to be inserted, B501001F would be
entered.
If there are three keystrokes, the syntax would change from B5xxssnn for one keystroke to
B5xxssnnssnnssnn. An example that would insert "abc" is as follows: B503001F00320030F833.
Note: Key modifiers can be added together when needed. The sum is converted to hexadecimals.
Example: Control Left+Shift Left = 17, converted to hexadecimal = 11.

Move Commands

Move the cursor forward a number of characters
F5 Move the cursor ahead "nn" characters from current cursor position.
Syntax = F5nn where nn is the numeric value (00-99) for the number of characters the cursor
should be moved ahead.
F5 Example: Move the cursor forward and send the data
Move the cursor forward 3 characters, then send the rest of the barcode data from the
barcode above. End with a carriage return.
68
Key Modifiers Hex
No Key Modifier 00
Shift Left 01
Shift Right 02
Alt Left 04
Alt Right 08
Control Left 10
Control Right 20
HH1800 User Guide