UPC-E0 On/Off
Most U.P.C. barcodes lead with the 0 number system. To read these codes, use the UPC-E0
On selection. If you need to read codes that lead with the 1 number system, use
106). Default = On.
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
UPC-E0 Addenda Required
When Required is scanned, the scanner will only read UPC-E barcodes that have addenda.
Default = Not Required.
HH1800 User Guide
* UPC-E0 On
On
Required
UPC-E1
(page
UPC-E0 Off
* Off
* Not Required
105